MARMO BARRIER PLUS
The very fast development of protective effect |
Distinctive nano effect |
No or only low colour enhancement |
Excellent oil- and grease repellent effect |
Excellent reduction of water – and dirt absorption during periods of moisture |
Fast liberation of humidity during dry periods due to high vapour permeability |
Evidently low adhesion of paints on treated stone surfaces |
Products Specification
MARMO BARRIER PLUS – solvent base is ready to use weather-resistant and non-yellowing impregnation based on high-quality organic active substances. The product is absorbed by the stone due to the capillary forces, however, without closing the pores.
Advantage
- UV Resistant
- Non Yellowing
- Stain Resistant
- Enhances Color Tone
- Helps Protects Against Graffiti
Technical Specification
- Coverage: Approx 5 — 20 m2/liter
- Depending on the absorptive capacity of the stone. -Colour: Transparent Yellowish
- Density: Approx 0.78 g/cm2
Application
- Using a paintbrush, cloth, fleece, or sponge applicator,
- Apply MARMO BARRIER – PLUS undiluted to a completely clean and dry natural stone surface.
- Allow the material to naturally absorb evenly.
- Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge.
- Avoid applying in direct sunlight. Wait 24 hours after treatment for the finished surface.
- In the case of treating natural stone surfaces that receive foot traffic, do not walk on the treated surface for 4-6 hours after treatment.
User Reviews
Be the first to review “MARMO BARRIER PLUS”
No more offers for this product!
General Inquiries
There are no inquiries yet.
There are no reviews yet.