|| India's First Integrated Platform for Green Building Solutions ||

MARMO BARRIER

Brand
4 out of 5
The very fast development of the protective effect
Distinctive nano effect
No or only low color enhancement
Excellent oil- and grease-repellent effect
Excellent reduction of water – and dirt absorption during periods of moisture
Fast liberation of humidity during dry periods due to high vapour permeability
Evidently low adhesion of paints on treated stone surfaces

 

 

Submit the inquiry to get direct support from our product team

Added to wishlistRemoved from wishlist 0
Add to compare
  Inquiry

Products Specification

Marmo Barrier – solvent base is ready to use weather-resistant and non-yellowing impregnation based on high-quality organic active substances. The product is absorbed by the stone due to the capillary forces, however, without closing the pores. The product is characterised by the following properties.

Advantages

  • Deeper penetration into substrates
  • Excellent Hydro Phobic Properties
  • Highly resistant to water-based staining damages
  • Surfaces treated with MARMO BARRIER are harder and less slippery
  • Easy to use & clean
  • U V resistant

Technical Specification

  • Coverage: Approx 5 — 20 m2/litre — depending on the absorptive capacity of the stone.
  • Colour: Transparent Yellowish
  • Density: Approx 0.78 g/cm2

Application

  • Shake the container well for one minute before opening the container for use.
  • Apply MARMO BARRIER uniformly over the surface till it is damp, using a clean white cloth/roller or paintbrush.
  • Leave the treated surface for 4-5 minutes and remove excess product from the surface using a clean white cloth.
  • The cleaning should be done, using a white cotton cloth by pressing the cloth on the applied surface and buffing the area in a circular motion, before the liquid dries on the surface.
  • In case any dried residue is left on the surface, the same can be removed by reapplication of MARMO BARRIER and cleaning the excess immediately.
  • Multiple applications may be required for some stones. In case of multiple applications, allow a 6 to 12 hours gap between the applications.
  • Allow cure time of 72 hours (Air Cure) for sealers to become completely effective.

 

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “MARMO BARRIER”

Your email address will not be published. Required fields are marked *

No more offers for this product!

General Inquiries

There are no inquiries yet.

Econaur
Logo
Compare items
  • Total (0)
Compare
0

FREE

Sustainable Material Guide

E-Book

Sustainable Material Guide
Shopping cart